www.pwoutlet.com

 

AR (ANNOVI REVERBERI) VERTICAL SHAFT PRESSURE WASHER PUMP WITH EZ START VALVES

 

2.2 GPM       2400 PSI            3400 RPM      GAS ENGINE FLANGE

BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

 

PHYSICAL SIZE: CLICK “TECHNICAL SPECS” TAB ABOVE

 

INPUT: FEMALE GARDEN HOSE    OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)

CONVENIENT CONNECTION TO MOST 7/8" SHAFT ENGINES

PUMP IS PREFILLED WITH OIL

 

THERMAL RELIEF VALVE IS INCLUDED 

 

COVERED BY AR ONE YEAR WARRANTY FOR DETAILS CLICK: AR WARRANTY

 

FITS MANY RESIDENTIAL MACHINES SEE “EXTENDED INFORMATION”

 

AVAILABILITY: IN STOCK

 

 

THERE IS AN “SX” VERSION OF THIS PUMP WHICH IS USED ON A NUMBER OF MACHINES WITH THE WATER CONNECTIONS AT THE REAR.  THE PORTS ON THE “SX” VERSION ARE ROTATED 180 DEGREES FROM THE STANDARD.

  

NOT ALL “SX” PUMPS ARE MARKED AS SUCH SO YOU SHOULD TAKE A LOOK AT THE PICTURE BELOW BEFORE ORDERING TO DETERMINE WHICH PUMP YOU NEED.  “SX” IS THE SUFFIX IN THE PRODUCT CODE.    RMW2.2G24-EZ-SX

• 
• 
• 

THIS PUMP IS COMMONLY FOUND ON RESIDENTIAL USE PRESSURE WASHERS.  THESE MACHINES ARE MADE BY SEVERAL MANUFACTURES UNDER NUMEROUS BRAND NAMES.  A PARTIAL LIST OF THE BRAND NAMES IS BELOW.  THIS PUMP WILL FIT MANY OF THOSE UNITS.  THIS PUMP IS MOST OFTEN USED ON MACHINES WHERE THE WATER CONNECTIONS ARE AT THE FRONT OF THE MACHINE.  CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.

THIS PLUNGER PUMP WILL PUMP UP TO 2.2 GPM AT 2400 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8” SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.

BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND,  DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN,  TASK FORCE, TROY-BILT, VOX, WATER BLASTER

Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.