 
 THE PORTS ON THIS PUMP ARE ROTATED 180 DEGREES FROM MOST OF THE OTHER AR RMW SERIES VERTICAL SHAFT PUMPS WE STOCK. IT IS USED ON A NUMBER OF MACHINES WHERE THE WATER CONNECTIONS ARE AT THE REAR OF THE MACHINE.
SEE “FEATURES” BELOW FOR A COMPARISON OF THIS PUMPS ORIENTATION VS THE OTHER AR PUMPS. THE STANDARD VERSION OF THIS PUMP IS RMW2.2G24-EZ
AR VERTICAL SHAFT PRESSURE WASHER PUMP WITH EZ START VALVES
THIS PUMP IS THE ORIGINAL OR AN EQUAL TO OR BETTER THAN REPLACEMENT FOR THE FOLLOWING BRIGGS AND STRATTON PUMPS: 194258GS, 202274GS, 202605GS, 207365GS, B1262A, B1906AGS, B5685B
2.2 GPM 2400 PSI 3400 RPM GAS ENGINE FLANGE
BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR
PHYSICAL SIZE: CLICK “TECHNICAL SPECS” TAB ABOVE
INPUT: FEMALE GARDEN HOSE OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)
CONVENIENT CONNECTION TO MOST 7/8" SHAFT ENGINES
PUMP IS PREFILLED WITH OIL
THERMAL RELIEF VALVE IS INCLUDED
COVERED BY AR ONE YEAR WARRANTY FOR DETAILS CLICK: AR WARRANTY
FITS MANY RESIDENTIAL MACHINES SEE “EXTENDED INFORMATION”
AVAILABILITY: IN STOCK
THIS PUMP IS COMMONLY FOUND ON RESIDENTIAL USE PRESSURE WASHERS. THESE MACHINES ARE MADE BY SEVERAL MANUFACTURES UNDER NUMEROUS BRAND NAMES. A PARTIAL LIST OF THE BRAND NAMES IS BELOW. THIS PUMP WILL FIT MANY OF THOSE UNITS. THIS PUMP IS MOST OFTEN USED ON MACHINES WHERE THE WATER CONNECTIONS ARE AT THE REAR OF THE MACHINE. CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.
THIS PLUNGER PUMP WILL PUMP UP TO 2.2 GPM AT 2400 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8” SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.
BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND, DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN, TASK FORCE, TROY-BILT, VOX, WATER BLASTER
Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
|
