Home > Pumps >

CAT 4PPX25GSI Plunger Pressure Washer Pump

CAT 4PPX25GSI 3300-PSI Plunger Pump


 
Our Price: $335.95


Product Code: SLP4PPX25GSI-057

Description Extended Information
 


CAT PPX SERIES PLUMBED PLUNGER PRESSURE WASHER PUMP

PLUMBED AND READY TO INSTALL - INCLUDES UNLOADER (BUILT IN), THERMAL RELIEF VALVE, GARDEN HOSE INLET, CHEMICAL INJECTOR TUBE/FILTER AND MALE QC OUTLET

3/4 HOLLOW SHAFT | GAS ENGINE FLANGE

2.5 GPM | 3300 PSI | 3400 RPM | BRASS MANIFOLD

INLET 3/8 FPT | OUTLET 3/8 MPT

BUILT IN UNLOADER AND CHEMICAL INJECTOR

COVERED BY CAT TWO YEAR WARRANTY FOR DETAILS CLICK: CAT WARRANTY

AVAILABILITY: IN STOCK

Accessories for this product...
CAT PUMP OIL 21 OZ BOTTLE 22 MM x 14 MM MALE / 3/8 FPT ADAPTER AR PRESSURE WASHER PUMP SAVER QUICK COUPLER 3/8" FEMALE X 3/8" FPT
Our Price: $16.95

Add
Our Price: $5.95

Add
Our Price: $13.50

Add
Our Price: $6.75

Add
CAT PUMP OIL 21 OZ BOTTLE 22 MM x 14 MM MALE / 3/8” FPT ADAPTER AR PUMP SAVER PW64511 QUICK COUPLER 3/8" FEMALE X 3/8" FPT
QUICK COUPLER 3/8" FEMALE X 3/8" MPT GARDEN HOSE PUMP INLET QUICK COUPLER 3/8" MALE X 3/8" FPT QUICK COUPLER 3/8" MALE X 3/8" MPT
Our Price: $6.75

Add
Our Price: $9.95

Add
Our Price: $1.75

Add
Our Price: $1.75

Add
QUICK COUPLER 3/8" FEMALE X 3/8" MPT GARDEN HOSE PUMP INLET QUICK COUPLER 3/8" MALE X 3/8" FPT QUICK COUPLER 3/8" MALE X 3/8" MPT
DETERGENT / CHEMICAL PICKUP LINE THERMAL RELIEF VALVE / PUMP PROTECTOR 1/4" MPT
Our Price: $8.95

Add
Our Price: $9.95

Add
DETERGENT / CHEMICAL PICKUP LINE THERMAL RELIEF VALVE / PUMP PROTECTOR  1/4" MPT

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 Great pump. Watch fitment May 25, 2017
Reviewer: Allen LeBlanc from Sudbury, MA United States  
The pump is great and works very well.  I did have slight issue installation. As this Cat pump is oriented with plumbing on left and my previous AAA pump was right... when I went to attach, the plumbing set was inline with my handle carrier.  I needed to remove my machine, rebore mount holes and install 1 1/2" over to accommodate new pump.  Also, preplumb is set with male coupling end, whereas my previous set up was female.  Needed to change fitting.  Turned into a small project but in the end, works great.

Was this review helpful to you?


Browse for more products in the same category as this item:

Pumps
Pumps > Pumps by Shaft Size > Horizontal 3/4" Shaft Size
Pumps > Pumps by PSI Rating > 3001-3500 PSI