THE PORTS ON THIS PUMP ARE ROTATED 180 DEGREES FROM THE OTHER AR SRMW SERIES VERTICAL SHAFT PUMPS WE STOCK.
IT IS USED ON A NUMBER OF MACHINES WHERE THE WATER CONNECTIONS ARE AT THE REAR OF THE MACHINE.
SEE “FEATURES” BELOW FOR A COMPARISON OF THIS PUMPS ORIENTATION VS THE OTHER AR PUMPS. THE STANDARD VERSION OF THIS PUMP IS SRMW2.2G26-EZ
THIS PUMP IS THE SAME AS THE SRMW2.2G26-EZ-SX
AR (ANNOVI REVERBERI) VERTICAL SHAFT PRESSURE WASHER PUMP WITH EZ START VALVES
2.2 GPM | 2600 PSI | 3400 RPM | GAS ENGINE FLANGE
BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR
PHYSICAL SIZE: CLICK “TECHNICAL SPECS” TAB ABOVE
INPUT: FEMALE GARDEN HOSE | OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)
CONVENIENT CONNECTION TO MOST 7/8" SHAFT ENGINES
PUMP IS PREFILLED WITH OIL | THERMAL RELIEF VALVE IS INCLUDED
EZ START VALVES ALLOW FOR EASY ENGINE STARTING
SAME PUMP AS THE SRMW2.2G26-EZ-SX
COVERED BY AR ONE YEAR WARRANTY FOR DETAILS CLICK: AR WARRANTY
FITS MANY RESIDENTIAL MACHINES SEE “EXTENDED INFORMATION”TO CONFIRM THIS IS THE CORRECT PUMP FOR YOUR MACHINE: CLICK HERE
AVAILABILITY: IN STOCK
THIS PUMP IS COMMONLY FOUND ON RESIDENTIAL USE PRESSURE WASHERS. THESE MACHINES ARE MADE BY SEVERAL MANUFACTURES UNDER NUMEROUS BRAND NAMES. A PARTIAL LIST OF THE BRAND NAMES IS BELOW. THIS PUMP WILL FIT MANY OF THOSE UNITS. THIS PUMP IS MOST OFTEN USED ON MACHINES WHERE THE WATER CONNECTIONS ARE AT THE REAR OF THE MACHINE. CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.
THIS PLUNGER PUMP WILL PUMP UP TO 2.2 GPM AT 2400 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8” SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.
BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND, DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN, TASK FORCE, TROY-BILT, VOX, WATER BLASTER
Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.
Annovi Reverberi, North America warranty period is established from the date of invoice/shipment. The standard A.R. warranty is one year; however, certain models carry extended warranty periods as outlined in our full warranty statement. Items not covered under the standard warranty include wearable items such as seals, cups, o-rings, valves, seats and manifolds. Pumps are not covered under warranty, if run beyond their specifications, abused or neglected, serviced with other than genuine Annovi Reverberi parts or operated with alternative oils that do not provide proper lubrication.